Epson TM-300A Operator's Manual page 4

The TM-300A/B and TM-300PA/PB printers are designed to provide a high
cost-performance ratio. They are compact, light-weight, and highly reliable one-
station printers using plastic mechanical frames. They have the following fea-
tures and are applicable to the POS 1 station printer market.
Compact and light-weight.
l
High speed printing using logic-seeking.
l
High reliability and long life due to the use of stepping motors for both carriage
l
return and paper feeding.
Printing color switch (red/black) available.
l
Various formats are possible because the paper feeding pitch is selectable.
l
High general control utility based on the ESC/POS™ standard.
l
2 drawers can be driven due to the internal drawer interface.
l
Character font (7 X 9, 9 X 9) is selectable.
l
Semi-automatic paper loading.
l
Compact AC adapter power supply.
l
An auto-cutter unit is provided and full cut/partial cut is selectable by command.
l
A take-up device is included. (Standard only for the TM-300A/300PA)
l
TM-300A
TM-300B
TM-300PA
TM-300PB
Please be sure to read the instructions in this manual carefully before using
your new Epson printer.
INTRODUCTION
Function Available
With auto-cutter
With take-up device
With auto-cutter
With auto-cutter
With take-up device
With auto-cutter
ii
Interface
Serial
Serial
Parallel
Parallel