Change Information Operating Manual - Optimum OPTi drill DX 13V Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y

The following items are also not subject to liability or warranty claims:
- Wearing parts and components which are subject to a standard wear as intended such
as e.g. V-belts, ball bearings, illuminants, filters, sealings, etc.
- Non reproducible software errors

Any services, which OPTIMUM GmbH or one of its agents performs in order to fulfil any
additional warranty are neither an acceptance of the defects nor an acceptance of its obli-
gation to compensate. These services neither delay nor interrupt the warranty period.

The court of jurisdiction for legal disputes between businessmen is Bamberg.

If any of the aforementioned agreements is totally or partially inoperative and/or invalid, a
provision which nearest approaches the intent of the guarantor and remains within the
framework of the limits of liability and warranty which are specified by this contract is
deemed agreed.
8.4

Change information operating manual

Chapter
2 + parts
8.4.1 Decommissioning
CAUTION!
Used devices need to be decommissioned in a professional way in order to avoid later
misuses and endangerment of the environment or persons.

Unplug the power cord.

Cut the connection cable.

Remove all operating materials from the used device which are harmful to the envi-
ronment.

If applicable remove batteries and accumulators.

Disassemble the machine if required into easy-to-handle and reusable assemblies
and component parts.

Dispose of machine components and operating fluids using the intended disposal
methods.
GB DX13V | DX15V
Page 32
Short summary
DX15V spindle from B16 to MT2
Original operating instructions
new version number
1.0.1
Appendix
Version 1.0.1 dated 2016-04-25