Poe Led - Cisco Catalyst 9300 Series Hardware Installation Manual

PoE LED

Figure 7: STACK LED
This figure shows the LEDs on for each switch. When you press the Mode button to select the STACK LED,
the corresponding port LEDs will blink green for each switch. For example, for switch 1, port 1 will blink
green and the rest of the LEDs will be off. On switch 2, port 2 will blink green and the rest of the LEDs will
be off. The same behavior will be seen with the remaining switches in the stack.
1
2
3
PoE LED
The PoE LED indicates the status of the PoE mode: either PoE, PoE+, or Cisco UPOE.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
12
Stack member 1 4
Stack member 2 5
Stack member 3 6
Product Overview
LED blinks green to show
that this is switch 1 in the
stack.
LED blinks green to show
that this is switch 2 in the
stack.
LED blinks green to show
that this is switch 3 in the
stack.