Poe Led - Cisco Catalyst 9300 Series Hardware Installation Manual

Product Overview
green and the rest of the LEDs will be off. On switch 2, port 2 will blink green and the rest of the LEDs will
be off. The same behavior will be seen with the remaining switches in the stack.
1
2
3

PoE LED

The PoE LED indicates the status of the PoE mode: either PoE, PoE+, or Cisco UPOE.
Table 6: PoE LED
Color
Off
Stack member 1
Stack member 2
Stack member 3
Description
PoE mode is not selected. None of the 10/100/1000 ports have been denied power
or are in a fault condition.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
4 LED blinks green to show
that this is switch 1 in the
stack.
5 LED blinks green to show
that this is switch 2 in the
stack.
6 LED blinks green to show
that this is switch 3 in the
stack.
PoE LED
9