Attaching The Rack-Mount Brackets - Cisco Catalyst 9300 Series Hardware Installation Manual

Installing a Switch
Figure 23: Rack-Mounting Brackets
1
2
3

Attaching the Rack-Mount Brackets

Before you begin
You can use the minimum recommended number of two screws for installing the rack-mount bracket to each
side of the switch. If required, while mounting, you can use the additional four screws provided in the accessory
kit.
19-inch brackets (ACC-KIT-T1=)
Extension rails and 5 brackets for
four-point mounting, includes 19-inch
brackets (4PT-KIT-T2=)
ETSI brackets (RACK-KIT-T1=)
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
Attaching the Rack-Mount Brackets
4 23-inch brackets (RACK-KIT-T1=)
5 24-inch brackets (RACK-KIT-T1=)
- -
37