Cisco Catalyst 9300 Series Hardware Installation Manual page 58

Connecting a StackWise-480 Cable
Figure 29: Connecting the StackWise-480 Cable in a StackWise Port
1
Step 3 Connect the other end of the cable to the port on the other switch and finger-tighten the screws. Avoid
overtightening the screws.
To remove the StackWise-480 cable from the connector, make sure you fully unscrew the correct screws.
When the connectors are not being used, replace the dust covers.
Caution
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
46
Cisco logo
Removing and installing the StackWise cable can shorten its useful life. Do not remove and insert
the cable more often than is absolutely necessary (installing and removing it up to 200 times is
supported).
2 Connector screws
Installing a Switch