Installing A Network Module; Network Modules Overview - Cisco Catalyst 9300 Series Hardware Installation Manual

Installing a Network Module

•
•
•
•
•

Network Modules Overview

The Cisco Catalyst 9300 Series Switches supports the following optional network modules for uplink ports.
Network Module
C9300-NM-4G
C9300-NM-8X
C9300-NM-2Q
C9300-NM-4M
C9300-NM-2Y
C3850-NM-4-1G
Network Modules Overview, on page 51
Installing a Network Module in the Switch, on page 52
Removing a Network Module, on page 59
Installing and Removing Cisco Transceiver Modules, on page 60
Finding the Network Module Serial Number, on page 62
Description
This module has four 1G SFP module slots. Any combination of standard SFP
modules are supported.
Note
This module has eight 10G SFP+ module slots.
Note
This module has two 40G QSFP+ module slots.
Note
This module has four Multigigabit Ethernet (mGig) module slots.
Note
This module has two 25G SFP28 module slots.
Note
This module has four 1G SFP module slots. Any combination of standard SFP
modules are supported. SFP+ modules are not supported.
If you insert an SFP+ module in the 1G network module, the SFP+ module does
not operate, and the switch logs an error message.
C H A P T E R
Supported only on Cisco Catalyst 9300 Series Switches.
Supported only on Cisco Catalyst 9300 Series Switches.
Supported only on Cisco Catalyst 9300 Series Switches.
Supported only on Cisco Catalyst 9300 Series Switches.
Supported only on Cisco Catalyst 9300 Series Switches.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
3
51