Installing An Ssd-120G - Cisco Catalyst 9300 Series Hardware Installation Manual

Installing an SSD-120G

Installing an SSD-120G
Procedure
Step 1 Remove the blank cover on the USB 3.0 SSD slot on the switch and store it for future use.
Step 2 Insert the SSD-120G into the module slot, and firmly push it into the slot. Make sure your insert the SSD-120G
in such a way that the Cisco label on the drive stays upright.
Figure 52: Installing SSD-120G on a Cisco Catalyst 9300 Series Switch
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
84
Installing a USB 3.0 SSD