10/100/1000 Ports; Poe, Poe+, Cisco Upoe And Cisco Upoe+ Ports - Cisco Catalyst 9300 Series Hardware Installation Manual

Product Overview
Front panel components of a Cisco Catalyst 9300L Series switch
Figure 4: C9300L-48P-4X Switch Front Panel
1
2
3
4

10/100/1000 Ports

The 10/100/1000 ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length is 328 feet
(100 meters). The 100BASE-TX and 1000BASE-T traffic requires twisted pair (UTP) cable of Category 5
or higher. The 10BASE-T traffic can use Category 3 cable or higher.

PoE, PoE+, Cisco UPOE and Cisco UPOE+ Ports

The PoE+ and Cisco Universal Power Over Ethernet (Cisco UPOE and Cisco UPOE+) ports use the same
connectors as described in
• PoE+ ports: Support for IEEE 802.3af-compliant powered devices (up to 15.4 W PoE per port) and
Beacon LED (UID button)
Mode button
Status LEDs
USB mini-Type B (console) port
10/100/1000/Multigigabit Ethernet Port Connections, on page
support for IEEE 802.3at-compliant powered devices (up to 30 W PoE+ per port).
5 USB Type A storage port
6 10/100/1000 PoE+ ports
7 Fixed uplink ports
- -
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
10/100/1000 Ports
48. They provide:
7