Cisco Catalyst 9300 Series Hardware Installation Manual page 122

Technical Specifications
Power Requirements
Total output BTU
6
The total input and total output BTU ratings refer to input power to the power supply and output power
to the switch. The BTU ratings are based on 100 VAC for the 350-W and 715-W power supplies and
115 VAC for the 1100-W power supply.
Table 41: Power Specifications for DC Power
Power Requirements
Maximum output power
Input current
Output ratings
Input voltage range domestic
Voltage range international
Total input BTU
Total output BTU
Wire gauge for ground connection
Branch circuit protection
7
The total input and total output BTU ratings refer to input power to the power supply and output power
to the switch. The BTU ratings are based on -40 VDC.
Table 42: Fan Module Environmental and Physical Specifications
Environmental Ranges
Operating temperature
Storage temperature
Relative humidity
Altitude
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
110
• PWR-C1-1100WAC: 3754 BTUs per hour, 1100 W
• PWR-C1-1100WAC-P: 3754 BTUs per hour, 1100 W
• PWR-C1-715WAC: 2440 BTUs per hour, 715 W
• PWR-C1-715WAC-P: 2440 BTUs per hour, 715 W
• PWR-C1-350WAC: 1194 BTUs per hour, 350 W
• PWR-C1-350WAC-P: 1194 BTUs per hour, 350 W
PWR-C1-715WDC: 715 W
PWR-C1-715WDC: 24–12 A
PWR-C1-715WDC: -56 V at 12.8 A
PWR-C1-715WDC: –36 VDC (minimum), –48 VDC (nominal), –72
VDC (maximum)
PWR-C1-715WDC: –36 VDC (minimum), –48 VDC (nominal), –72
VDC (maximum)
7
PWR-C1-715WDC: 2777 BTUs per hour, 715 W
PWR-C1-715WDC: 2440 BTUs per hour
PWR-C1-715WDC: 12 AWG or 8 AWG
PWR-C1-715WDC: 20 A
23 to 176°F (–5 to 80°C)
–40 to 185°F (–40 to 85°C) up to 15,000 ft (4500 m)
5 to 95% (noncondensing)
Up to 13,000 ft (4000 m)
Technical Specifications