Transceiver Module Network Cables - Cisco Catalyst 9300 Series Hardware Installation Manual

Transceiver Module Network Cables

Product ID
STACK-T1-3M
The optional StackWise-320 kit for Catalyst 9300L Series fixed uplink models consists of two stack adapters
and a stacking cable. The default stacking cable is 0.5 m, however options of 1m and 3m are also available.
Table 45: Cisco StackWise-320 Accessories
Product ID
C9300L-STACK-KIT
STACK-T3-50CM
STACK-T3-1M
STACK-T3-3M
Table 46: StackWise Cables Minimum Bend Radius and Coiled Diameter
Cable Part Number
STACK-T1-50CM
STACK-T1-1M
STACK-T1-3M
STACK-T3-50CM
STACK-T3-1M
STACK-T3-3M
1. With a 0.5m cable, the minimum coiled diameter is negligible and the cable cannot be physically coiled
without exceeding the bending limit.
Transceiver Module Network Cables
For cabling specifications, refer to the following notes:
•
•
Each port must match the wavelength specifications on the other end of the cable, and the cable must not
exceed the stipulated cable length. Copper 1000BASE-T SFP module transceivers use standard four twisted-pair,
Category 5 cable at lengths up to 328 feet (100 meters).
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
116
Cable Length
1.64 feet (0.5 m)
3.28 feet (1.0 m)
9.84 feet (3.0 m)
1.64 feet (0.5 m)
3.28 feet (1.0 m)
9.84 feet (3.0 m)
Cisco SFP and SFP+ Transceiver Module Installation Notes
Cisco 40-Gigabit QSFP+ Transceiver Modules Installation Note
Connector and Cable Specifications
Product Description
Cisco StackWise-480 3m stacking cable
Product Description
Stack kit for C9300L switches that includes 2 stack
adaptors and 1 stack cable
Cisco StackWise-320 50cm stacking cable
Cisco StackWise-320 1m stacking cable
Cisco StackWise-320 3m stacking cable
Minimum Bend Radius Minimum Coiled Diameter
1.6 in. (41 mm) Not applicable
1.6 in. (41 mm) 5.2 in. (132 mm)
3.2 in. (82 mm) 7.17 in. (182 mm)
1.6 in. (41 mm) Not applicable
1.6 in. (41 mm) 5.20 in. (132 mm)
3.2 in. (82 mm) 7.17 in. (182 mm)