Rj-45 Console Port Led; Stackwise Ports; Power Supply Modules - Cisco Catalyst 9300 Series Hardware Installation Manual

RJ-45 Console Port LED

RJ-45 Console Port LED
Table 12: RJ-45 Console Port LED
Color
Off
Green

StackWise Ports

StackWise ports are used to connect switches in StackWise stacking configurations. The switch ships with a
0.5-meter StackWise cable that you can use to connect the StackWise ports. For more information on StackWise
cables, see
Caution Use only approved cables, and connect only to similar Cisco equipment. Equipment might be damaged if
connected to nonapproved Cisco cables or equipment.

Power Supply Modules

The switches are powered through one or two internal power supply modules.
Following are the supported power supply modules:
• PWR-C1-350WAC
• PWR-C1-715WAC
• PWR-C1-1100WAC
• PWR-C1-350WAC-P
• PWR-C1-715WAC-P
• PWR-C1-1100WAC-P
• PWR-C1-715WDC
The switch has two internal power supply module slots. You can use two AC modules or one power supply
module and a blank module.
The switch can operate with either one or two active power supply modules or with power supplied by a stack.
A switch that is in a StackPower stack can operate with power supplied by other switches in the stack.
Switch Models, on page 1
the power supply modules (except the blank modules) have internal fans. All switches ship with a blank power
supply module in the second power supply slot.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
20
Connecting the StackWise Cables, on page
shows the default power supply module that ships with each switch model. All
RJ-45 Console Port Status
RJ-45 console is disabled. USB console is active.
RJ-45 console is enabled. USB console is disabled.
43.
Product Overview