Interrupts/Diagnostic Messages; Status And Error Display - Siemens SIMATIC ET 200SP F-AI 4xI 0(4) 20mA 2-/4-wire HF Series Manual

Interrupts/diagnostic messages

6.1

Status and error display

LED display
The following figure shows the LED display of the F-AI 4xI 0(4)..20mA 2-/4-wire HF.
①
②
③
④
Figure 6-1
Meaning of the LED displays
The following tables show the meaning of the status and error displays. Remedies for
diagnostics alarms can be found in section Diagnostic messages (Page 58).
The DIAG LED and the channel status and channel fault LEDs of the outputs are not
designed as safety-related LEDs and therefore may not be evaluated for safety-related
activities.
Analog input module F-AI 4xI 0(4)..20mA 2-/4-wire HF (6ES7136-6AA00-0CA1)
Manual, 08/2018, A5E41448857-AB
DIAG (green/red)
Channel status (green)
Channel fault (red)
PWR (green)
LED display
WARNING
6
53