Siemens SIMATIC ET 200SP F-AI 4xI 0(4) 20mA 2-/4-wire HF Series Manual page 66

Technical specifications
7.1 Technical specifications
Article number
Encoder
Connection of signal encoders
for current measurement as 2-wire transducer
•
– Burden of 2-wire transmitter, max.
for current measurement as 4-wire transducer
•
Errors/accuracies
Linearity error (relative to input range), (+/-)
Temperature error (relative to input range), (+/-)
Repeat accuracy in steady state at 25 °C (relative to
input range), (+/-)
Operational error limit in overall temperature range
Current, relative to input range, (+/-)
•
Basic error limit (operational limit at 25 °C)
Current, relative to input range, (+/-)
•
Interference voltage suppression for f = n x (f1 +/- 1 %),
f1 = interference frequency
Series mode interference (peak value of interfer-
•
ence < rated value of input range), min.
Common mode interference, min.
•
Interrupts/diagnostics/status information
Diagnostics function
Alarms
Diagnostic alarm
•
Limit value alarm
•
Diagnostic messages
Monitoring the supply voltage
•
Wire-break
•
Short-circuit
•
Diagnostics indication LED
RUN LED
•
ERROR LED
•
Monitoring of the supply voltage (PWR-LED)
•
Channel status display
•
for channel diagnostics
•
for module diagnostics
•
66
6ES7136-6AA00-0CA1
Yes
650 Ω
Yes
0.1 %
0.023 %/K
0.1 %
2 %
0.1 %
40 dB
70 dB
Yes, "Alarms/diagnostic messages" section
in the manual
Yes
Yes
Yes
Yes; Measuring range 4 to 20 mA only
Yes
Yes; Green LED
Yes; Red LED
Yes; green PWR LED
Yes; Green LED
Yes; Red LED
Yes; Green/red LED
Analog input module F-AI 4xI 0(4)..20mA 2-/4-wire HF (6ES7136-6AA00-0CA1)
Manual, 08/2018, A5E41448857-AB