Creation Of Test Program; Selection Of The Test Type - ATEQ PRIMUS F Series User Manual

4. CREATION OF TEST PROGRAM

To access to the parameters menu, from the
cycle menu, press the
Then select the
Select a program by using the
To create a new program, press an empty
program (----------).
Then the test type selection window is
displayed (see following paragraph).
4.1. S
ELECTION OF THE TEST TYPE
Four types of test are available:
The PARAMETERS menu gives access to
four possible tests types :
Leak test (LEAK TEST).
Pressure test (BLOCKAGE).
Test in desensitized mode
(DESENSITIZED TEST).
Operator test (OPERATOR). .
Burst test (BURTS TEST).
Volume measurement (VOLUME).
For the different tests types, see the sheet
#673: "Definition,
measurement principles".
Version 1.04a
or
keys.
menu
keys.
characteristics
Copy-Paste
Pr:01
Pr:02
Pr:03
Pr:04
Pr:05
Pr:06
Pr:07
LEAK TEST
BLOCKAGE
DESENSITIZED TEST
OPERATOR
and
Sheet #678u – Starting up
Pr 001
LEAK TEST
-----------------
-----------------
-----------------
-----------------
-----------------
-----------------
-----------------
User guide ATEQ 6th series Page 4/4