Program Sensor - ATEQ VT TRUCK 2.0 User Manual

4.3 P
ROGRAM
This section explains how to obtain the ID of a sensor to insert it into a programmable
sensor:
• If the "old" sensor is readable, use the Copy ID section page 25 or Copy Set page
27 to retrieve the ID.
• If the "old" sensor is not readable, use the Create New Sensor section page 23 or
Manual ID section page 30 to create a new ID.
To program a sensor, you must:
• select the universal sensor model,
• then select a truck model.
UM-KHTA1-03-01
All the truck's sensors have been checked
S
ENSOR
VT TRUCK 2.0 – User Manual
Next
Back
Page 20/53