Page 1
Do not plug two USB components together! 2. LOWER SIDE CONNECTORS Example of lower side face: Note: following the versions and the purchase options, the customer device may be different from the example shown above. Version 1.04a User guide ATEQ 6th series Page 1/7...
Not used Pin 9 Not used 3.2.1. 1) Examples of RS232 cables 9 pin SubD 25 pin SubD 9 pin SubD 9 pin SubD ATEQ User ATEQ User connector connector connector connector Version 1.04a User guide ATEQ 6th series Page 2/7...
Page 3
EVICENET ROFINET OR THERNET ONNECTORS OPTION 3.3.1. Devicenet Input (option) To connect to others ATEQ devices (M12 male connector). 3.3.2. J2 Devicenet output (option) To connect to others ATEQ devices (M12 female connector). 3.3.3. Wiring Devicenet Pin 1 Drain Pin 3...
Page 4
Input 4 (NPN or PNP)* Pin 14 Ground Analogue outputs Pin 15 Input 5 (NPN or PNP)* Pin 16 Ground * Inputs NPN or PNP following the strap position on the board. Version 1.04a User guide ATEQ 6th series Page 4/7...
Page 5
J3 connector too. Customer (Pr 8 + 1) + 24 V DC (Programmable input) Common Good part INPUTS Test fail part NPN MODE Reference fail part Alarm End of cycle Ground Version 1.04a User guide ATEQ 6th series Page 5/7...
Page 6
(Pr 8 + 1) (Programmable input) Common 0,2 A Good part 0,3 A Max Test fail part with ATEQ 24 V DC Reference fail part Alarm 0,2 A End of cycle Ground Version 1.04a User guide ATEQ 6th series Page 6/7...
Page 7
(input 8) (input 9) 17 à 32 33 à 64 65 à 128 With x who takes the 0 or 1 value in function of the program number to be called. Version 1.04a User guide ATEQ 6th series Page 7/7...