Verify The Hardware Connections - Axis A1601 User Manual

AXIS A1601 Network Door Controller
System configuration
How to add and setup network peripherals
Important
• Before you set up the network periphals you need to add a user in AXIS A9188 Network I/O Relay Module. Go to the AXIS
A9188 web interface > Preferences > Additional device configuration > Basic setup > Users > Add > User setup.
• Don't add another AXIS A1001 Network Door Controller as a network peripheral.
1. Go to Setup > Network Periphals to add a device
2. Find your device(s) under Discovered devices.
3. Click Add this device
4. Enter a name for the device
5. Enter the AXIS A9188 username and password
6. Click Add.
Note
You can manually add network periphals by entering MAC address or IP address in the Manually add device dialog.
Important
If you want to delete a schedule, first make sure it's not used by the network I/O relay module.
How to setup I/Os and relays in network peripherals
Important
Before setting up the network peripherals you need to add a user in AXIS A9188 Network I/O Relay Module. Go to the AXIS
A9188 web interface > Preferences > Additional device configuration > Basic setup > Users > Add > User setup.
1. Go to Setup > Network Periphals and click on the Added devices row.
2. Choose which I/Os and relays to set as floor.
3. Click Set as floor and enter a name.
4. Click Add.
Note
In AXIS Entry Manager you can add maximum 16 floors.

Verify the Hardware Connections

When the hardware installation and configuration is complete, and anytime during the door controller's lifetime, you can verify the
function of the connected door monitors, Network I/O Relay Modules, locks and readers.
To verify the configuration and access the verification controls, go to Setup > Hardware Connection Verification.
Verification Controls Doors
• Door state – Verify the current state of the door monitor, door alarms and locks. Click Get current state.
• Lock – Manually trigger the lock. Both primary locks and secondary locks if there are any will be affected. Click Lock or
Unlock.
• Lock – Manually trigger the lock to grant access. Only primary locks will be affected. Click Access.
16