Axis A1601 User Manual page 22

AXIS A1601 Network Door Controller
Event configuration
1. Go to Setup > Additional Controller Configuration > System Options > Ports & Devices > I/O Ports.
2. Select Output from the desired I/O Port Type drop-down list and enter a Name.
3. Select the I/O port's Normal state and click Save.
4. Go to Events > Action Rules and click Add.
5. Select Door from the Trigger drop-down list.
6. Select Door Alarm from the drop-down list.
7. Select the desired door from the drop-down list.
8. Select DoorForcedOpen from the drop-down list.
9. Optionally, select a Schedule and Additional conditions. See below.
10. Under Actions, select Output Port from the Type drop-down list.
11. Select the desired output port from the Port drop-down list.
12. Set state Active.
13. Select Duration and Go to opposite state after. Then enter the desired duration of the action.
14. Click OK.
To use more than one trigger for the action rule, select Additional conditions and click Add to add additional triggers. When using
additional conditions, all conditions must be met to trigger the action.
To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds,
during which the trigger should be ignored before the action rule can be activated again.
For more information, see the product's built-in help.
How to add recipients
The product can send messages to notify recipients about events and alarms. But before the product can send notification messages,
you must define one or more recipients. For information about available options, see .
To add a recipient:
1. Go to Setup > Additional Controller Configuration > Events > Recipients and click Add.
2. Enter a descriptive name.
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.
How to set up email recipients
Email recipients can be configured by selecting one of the listed email providers, or by specifying the SMTP server, port and
authentication used by, for example, a corporate email server.
Note
Some email providers have security filters that prevent users from receiving or viewing large attachments, from receiving
scheduled emails and similar. Check the email provider's security policy to avoid delivery problems and locked email accounts.
22