Axis A1601 User Manual page 24

AXIS A1601 Network Door Controller
Event configuration
The table below shows the events that are preconfigured in the door controller to trigger reader feedback and their typical reader
feedback signals. Feedback signals for AXIS readers are presented in the Installation Guide supplied with the AXIS reader.
Event
1
Idle
RequirePIN
AccessGranted
AccessDenied
1. Idle state is entered when the door is closed and the lock is locked.
Feedback messages other than the above must be configured by a client such as an access management system, through the VAPIX®
application programming interface, that supports this feature and use readers that can provide the required signals. For more
information, see the user information supplied by the access management system developer and reader manufacturer.
Wiegand Wiegand
dual LED single LED
Off Red
Flashing red/green Flashing red/green
Green Green
Red Red
OSDP Beeper pattern
Red Silent
Two short beeps
Flashing red/green
Green Beep
Red Beep
24
State
Normal
PIN required
Access granted
Access denied