Controls - Toro Multi Pro 5800-D Operator's Manual

Controls

1. Work-light switch
2. Steering wheel
3. Pressure gauge
Vehicle Controls
Traction Pedal
The traction pedal (Figure
reverse movement of the machine. Using the heel
and toe of the right foot, press the top of the pedal
to move forward or the bottom of the pedal to move
the machine in reverse. Release the pedal to slow
and stop the machine.
Important:
Ensure that you allow the sprayer
to come to a stop before switching between the
F and the R
ORWARD EVERSE
Note:
The farther you press the pedal in either
direction, the faster the sprayer travels. To obtain
maximum forward speed, set the throttle lever to
the F position and press the traction pedal fully
AST
forward.
Note:
To get maximum power under heavy load or
when ascending a hill, have the throttle in the F
position while pressing the traction pedal slightly to
keep the engine speed high. When the engine speed
4. Fuel gauge
5. Passenger handhold
6. Storage compartment
8) controls the forward and
positions.
AST
Figure 7
7. InfoCenter
8. Quick Find™ console
9. Armrest
begins to decrease, release the traction pedal slightly
to allow the engine speed to increase.
1. Parking-brake pedal
2. Brake pedal
19
10. Ignition switch
Figure 8
3. Traction pedal
g032467
g032468