Toro Multi Pro 5800-D Operator's Manual page 40

InfoCenter Advisories
Operator advisories automatically display on the
InfoCenter screen when a machine function requires
additional action. For example, if you attempt to
start the engine while pressing the traction pedal, an
advisory displays, indicating that the traction pedal
must be in the N
EUTRAL
For each advisory that occurs, there is a condition
(e.g., start prevent, engine stopped), an advisory
code (number), a qualifier (the cause of the advisory
displayed), and a display text (what the advisory
displays as text on the screen) as shown in
45. Refer to the InfoCenter advisory table that follows
for more information.
Note:
Advisories are not recorded into the fault log.
Note:
You can clear an advisory from the display
screen by pressing any of the InfoCenter keys.
InfoCenter Advisory Table
Condition
Start Prevented
Start Prevented
Start Prevented
Start Prevented
Start Prevented
Engine Stopped
Engine Stopped
Pump Start Prevented
Pump Start Prevented
Pump Start Prevented
Pump Turned Off
Tank Status
Tank Status
Parameter Status
Parameter Status
Booms Turned Off
position.
Figure
Code
2
3
4
5
6
102
103
202
203
205
206
402
403
502
503
802
1. Display text
2. Code
Qualifier
Pump switch active
Not in N
EUTRAL
Out of seat
Starter engage timeout
Rinse pump active
Out of seat
Parking brake set
Boom active
Out of seat and parking brake
not set
Engine starting
Out of seat
Low spray tank volume
Rinse pump active
Wrong parameter value entered
A value is outside the range of
accepted values
Speed dropped
40
Figure 45
3. Press any key on the
InfoCenter to clear the text
from the display screen.
Display Text
To start, turn pump off
To start, return traction pedal to
neutral
To start, must be seated or set
the parking brake
To start, rest starter
To start, turn off rinse pump
Engine stop due to operator out
of seat
Engine stop due to parking
brake engaged
To start pump, turn booms off
To start pump, must be seated
or set parking brake
To start pump, stop cranking
engine
To start pump, remain seated
Tank status, volume low
Tank status, rinse pump on
Parameter status, invalid value
Parameter status, invalid data
defaults used
Booms turned off, stopped or
moving too slowly
g034318