Figure 110
1. Bypass fitting
Cleaning the Manifold Valve
1.
Position the valve stem so that it is in the closed
position
(Figure 111
Figure 111
1. Valve open
2.
Remove the 2 end-cap-fitting assemblies from
each end of the manifold body
Figure
113).
2. Section-valve manifold
B).
2. Valve closed
(Figure 112
g032549
1. Stem retainer
2. Valve stem
3. Stem port
4. Stem retainer
5. Endcap fitting
6. Endcap-seal O-ring (0.796
inch/0.139 inch)
g027562
and
81
Figure 112
Agitation Valve Manifold
7. Back seating O-ring (0.676
inch/0.07 inch)
8. Valve-seat ring
9. Mainfold body
10. Ball valve
11. Quick connect
g032550