TaiShan 2280 V2 Server
User Guide
Figure 3-12 Installing a fan module
Step 8 Install the chassis cover. For details, see
Step 9 Install the server. For details, see
Step 10 Connect the power cables. For details, see
Step 11 Power on the server. For details, see
Step 12 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
----End
3.10 Removing the Air Duct
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Issue 01 (2019-07-01)
NOTE
Fan modules on the same server must have the same BOM number.
TaiShan Rack Server iBMC User
Copyright © Huawei Technologies Co., Ltd.
3.7-Installing the Chassis
4.4-Installing the Server on Guide
3.5 Connecting Cables to a
3.1 Powering On the Server
Guide.
12 Preventing Electrostatic
3.2 Powering Off the
3.4 Removing Cables from a
3 Basic Operations
Cover.
Rails.
PSU.
Discharge.
Server.
PSU.
40