Hydraulic Connections - Zodiac Edenpac 2 Manual

4.2 Hydraulic connections

Connect the appliance's PVC Ø 50 hose water inlet and outlet (according to symbols) to the removable fittings provided
with the heat pump. See symbols :
Connection is established with a by-pass on the pool filtration circuit after the filter and before the water treatment facility
(see diagrams below).
- Hydraulic circuit test pressure: 3 bar
Edenpac 2,3,4 and 5 : - Average water flow 5 to 6.5 m3/h- pressure drop 1.3 to 1.7 mCE
Edenpac 6 : - Average water flow 7.5 m3/h- pressure drop 1.1 mCE
and
for inlet for outlet
- Hydraulic circuit operating pressure: 1.5 bar
V1
V3
V2
V1
V3
V2
10
.
–
(0.11 bar)
(0.13 to 0.17 bar)
V5
V4
V1-V2-V3 : By-pass valve
V5-V4 : Regulator valve*
* Recommended to facilitate
adjustment close to the machine.
V5
V4
V1-V2-V3 : By-pass valve
V5-V4 : Regulator valve*
* Recommended to facilitate
adjustment close to the unit.
–