Equipment Required But Not Supplied; Incoming Inspection - Keysight Technologies 85032B User's And Service Manual

50 o type-n calibration kits

Table of Contents

General Information

Equipment Required but Not Supplied

Some items are required or recommended for successful operation of the calibration kit, but are not

included in the kit. Refer to

Table 6-3 on page 6-5

for a list of these items and for ordering information

Verify that the shipment is complete by referring to

Table 6-1 on page 6-2

Table 6-2 on page

6-4.

Check for damage. The foam-lined storage case provides protection during shipping.

If the case or any device appears damaged, or if the shipment is incomplete, contact Keysight. See

Contacting Keysight on page

5-4. Keysight will arrange for repair or replacement of incomplete or damaged

shipments without waiting for a settlement from the transportation company.

When you send the kit or device to Keysight, include a service tag (found near the end of this manual) with

the following information:

• your company name and address

• the name of a technical contact person within your company, and the person's complete phone number

• the model number and serial number of the kit

• the part number and serial number of the device

• the type of service required

• a detailed description of the problem

1- 4

85032B/E

Table of Contents

Do you have a question about the 85032B and is the answer not in the manual?

85032e