Table of Contents
Advertisement
General Information
Calibration Kit History
Equipment Required but Not Supplied
Cleaning supplies and various electrostatic discharge (ESD) protection devices are not supplied with the
calibration kit but are required to ensure successful operation of the kit. Refer to
Table 7-4 on page 7-10
for
their associated part numbers.
Calibration Kit History
This manual applies to any Keysight 11644A series (X, P, or K) waveguide calibration kits whose serial
number prefix is 3032A and above. If your calibration kit has a different serial number prefix, refer to the
next section for information on how this manual applies.
11644A Series Kits with Serial Prefix 3012A
These calibration kits did not have a calibration definitions disk to support the Keysight 8510C network
analyzer. The part numbers provided in this manual are the recommended replacement parts for these kits.
The devices in these kits should meet the specifications published in this manual.
Incoming Inspection
Verify that the case and its contents are not damaged. The foam-lined storage case provides protection
during shipping. If the case or any device appears damaged, or if the shipment is incomplete, refer to
"Contacting Keysight" on page
6-4. Keysight will arrange for repair or replacement of incomplete or
damaged shipments without waiting for a settlement from the transportation company. Refer to
"Returning
a Kit or Device to Keysight" on page
6-3.
X, P, and K 11644A
1-3
Advertisement
Table of Contents
Troubleshooting
