Electrical Specifications; Certification; Supplemental Electrical Characteristics - Keysight Technologies 85032B User's And Service Manual

Electrical Specifications

The electrical specifications in
Keysight precision interface.
Table 2-3 Electrical Specifications for 50Type-N Devices
Device
Loads
a
Female open
a
Female short
a
Male open
a
Male short
Adapters (type-N to 7-mm)
a. The specifications for the opens and shorts are given an allowed deviation from the nominal model as defined in
the standard definitions. .

Certification

Keysight Technologies certifies that this product met its published specifications at the time of shipment
from the factory. Keysight further certifies that its calibration measurements are traceable to the United
States National Institute of Standards and Technology (NIST) to the extent allowed by the Institute's
calibration facility, and to the calibration facilities of other International Standards Organization members.
See How Keysight Verifies the Devices in This Kit on page 4-2

Supplemental Electrical Characteristics

Supplemental electrical characteristics are values which are typically met by a majority of the calibration kit
devices tested. These supplemental characteristics are intended to provide information in calibration kit
applications by giving typical, but non-warranted, performance parameters.
electrical characteristics of the 50 loads and adapters in the 85032B/E calibration kit.
Table 2-4 Supplemental Electrical Characteristics
Device
Loads
Adapters (type-N to 7-mm)
85032B/E
Table 2-3 apply to the devices in your calibration kit when connected with a
Specification
Return loss 49 dB 0.00355)
Return loss 46 dB 0.00501)
Return loss 40 dB 0.01000)
0.501 0.484 GHz deviation from nominal
0.490 0.385 GHz deviation from nominal
0.501 0.234 GHz deviation from nominal
0.441 0.444 GHz deviation from nominal
Return loss dB 0.03162)
Specification
Return loss d 0.07079)
Return loss d 0.01995)
Return loss d 0.03981)
Electrical Specifications
Frequency (GHz)
DC to  2
> 2 to  3
> 3 to 6
DC to  6
DC to  6
DC to  6
DC to  6
DC to  6
for more information.
Table 2-4 lists the typical
Frequency (GHz)
> 6 to  18
DC to  8
> 8 to  18
Specifications
2-5