General Information
Calibration Kit Overview
Class assignments and standard definitions may change as more accurate model and calibration methods
are developed. You can download the most recent class assignments and standard definitions from
Keysight's Calibration Kit Definitions Web page at
www.na.support.keysight.com/pna/caldefs/stddefs.html
Installation of the Calibration Definitions
The calibration definitions for the kit may be permanently installed in the internal memory or hard disk of
the network analyzer.
If the calibration definitions for the kit are not permanently installed in the network analyzer, they must be
manually entered. Refer to your network analyzer user's guide for instructions.
Options
The following options are available for the Keysight 85032B/E.
Option 100 (85032B only)
Option 100 adds the four type-N to 7-mm adapters to the calibration kit.
Option UK6
This option adds a certificate of calibration and the corresponding calibration data for the devices in the
calibration kit.
85032B/E
1-3
Need help?
Do you have a question about the 85032B and is the answer not in the manual?