Download  Print this page

Setting The Ip Address Using The Arp/Ping Method - Motorola Avigilon H4 Series Installation Manual

Ptz dome camera
Hide thumbs

Advertisement

Setting the IP Address Using the ARP/Ping Method

Complete the following steps to configure the camera to use a specific IP address:
1. Locate and copy down the MAC Address (MAC) listed on the Serial Number Tag for reference.
2. Open a Command Prompt window and enter the following commands:
a. arp -s <New Camera IP Address> <Camera MAC Address>
For example: arp -s 192.168.1.10 00-18-85-12-45-78
b. ping -l 123 -t <New Camera IP Address>
For example: ping -l 123 -t 192.168.1.10
3. Reboot the camera.
4. Close the Command prompt window when you see the following message:
Reply from <New Camera IP Address>: ...
Setting the IP Address Using the ARP/Ping Method
21

Advertisement

loading

  Also See for Motorola Avigilon H4 Series

This manual is also suitable for:

Avigilon 2.0c-h4ptz-dp30Avigilon 1.0c-h4ptz-dp45