Chapter 6 Slave Controller Specifications 6-1 To; Outlook/Shape - Hitachi HIDIC EH-150 Applications Manual

Chapter 6
6.1

Outlook/Shape

Name and function of each part
6] Lock button
1] LED
2] DIP switch 1
4] Communication
connector
No. Name
1] LED
2] DIP switch 1
3] Reset switch
Communication
4]
connector
5] DIP switch 2
6] Lock button
Slave Controller Specifications
5] DIP switch 2
3] Reset switch
Displays the network status and error information.
Sets the node address and baud rate.
Resets the module.
Connects to the network.
Sets to Hold/Clear output for the output module on the
EH-IOCD.
This is used when removing the module from the base unit.
After it is mounted on the base unit, the attachment can be
reinforced using screws.
In this case, use M4 x 10 mm (0.39 in.) screws.
Chapter 6 Slave Controller Specifications
Type
Weight
Dimensions (mm)
45
Function
6-1
EH-IOCD
Approx. 0.16 kg
95
Remark
Use the packaged
connector.