Chapter 7 Discrete I/O Slave Unit Specifications 7-1 To; Outlook/Shape - Hitachi HIDIC EH-150 Applications Manual

Chapter 7
7.1

Outlook/Shape

Name and function of each part
HITACHI
DISTRIBUTED I/O CONTROLLER
8] Setting switch
DC INPUT(DC10 ∼ 30V)
4] Communication
connector
Type RDX16D
Weight Approx. 0.22 kg
Dimensions
(mm)
No. Name
1] Module status display LED (MS)
2] Network status display LED (NS)
3] I/O status display LED
4] Communication connector
5] Mounting holes (2 locations)
Mounting lever for fixing to DIN
6]
rail
7] Terminal block cover
8] Setting switch
Discrete I/O Slave Unit
Specifications
1] Module status display LED (MS) 3] I/O status display 5] Mounting holes x 2
RDX16D
0
MS 1
NS
2] Network status display LED (NS)
RDY16TP
Approx. 0.23 kg
150
140
75
Indicates the status of the slave unit.
Indicates the status of the network.
If an input/output signal is turned ON, the LED of the corresponding
number turns on. The LEDs turn on only when the power is applied.
This is a connector for connecting the DeviceNet communication cable.
These are used when the slave unit is attached to a panel, etc.
Use M4 x 12 mm screws.
This is used when attaching the unit to a DIN rail.
This is a cover attached to the terminal block area.
This switch is used for setting the slave unit address and
communication speed.
Chapter 7 Discrete I/O Slave Unit Specifications
2 4 6 8 10 12
3 5 7 9 11 13
RDY16R
Approx. 0.25 kg
2-φ4.5
M3 terminal
Function
7-1
14
7] Terminal
15
block cover
6] Mounting lever for
fixing to DIN rail
43