Hitachi HIDIC EH-150 Applications Manual page 64

Devicenet master module(eh-rmd)/ slave controller(eh-iocd)/ discrete i/o slave unit (rdx16d,rdy16tp,rdy16r)

Hide thumbs Also See for HIDIC EH-150:

Table of Contents

Check the communication with the set driver.

Select the set driver and click [Autobrowse] at the upper left corner to search for devices on the current

network. Check that the network devices other than the interface module are displayed and finish the search.

If the message "Unrecognized Device" is displayed, perform the registration of the EDS file explained later.

This is not a communication error.

Once the driver is set, it is not necessary to change it in steps 2 and 3, unless the interface module or

communication speed is changed.

When adding or deleting a slave device, start the operation from step 4.

S T E P

4 Startup of RSNetWorx

Start up RSNetWorx

From the Start menu of Windows®, click [Programs] → [Rockwell Software] → [RSNetWorx] →

[RSNetWorx for DeviceNet].

8-6

Chapter 8 Starting Up

Table of Contents