Hitachi HIDIC EH-150 Applications Manual page 63

Devicenet master module(eh-rmd)/ slave controller(eh-iocd)/ discrete i/o slave unit (rdx16d,rdy16tp,rdy16r)

Hide thumbs Also See for HIDIC EH-150:

Table of Contents

Set the serial port and DeviceNet port.

The setup dialogue box is displayed.

Perform the setting for both ports according to the actual system configuration.

Click [OK].

If a display similar to the one to the following is shown, the driver setting is completed.

If Status becomes "Running" like the following display, the setting of the driver is completed.

Click [Close].

8-5

Chapter 8 Starting Up

Default is 62.

When using

already by the

other node, set the

address which

doesn't overlap.

Table of Contents