If you have any questions concerning your shipment, please contact your supplier or your
local Leuze electronic sales office.
Observe the applicable local regulations when disposing of the packaging materials.
6.2
Mounting the BCL 338i
The BCL 338i bar code readers can be mounted in different ways:
• Via four or six M4x5 screws on the device bottom.
• Via a BT 56/BT 59 mounting device in the two fastening grooves on the device bot-
tom.
Attention!
The BCL 338i does not fulfill degree of protection IP 65 until the connection hood has been
screwed on. Minimum tightening torque of the housing connecting screw of the connection
hood is 1.4Nm!
6.2.1
Mounting via M4 x 5 screws
Figure 6.2:
Leuze electronic
Fastening options using M4x5 threaded holes
4 x M4x5
6 x M4x5
(oscillating-mirror scanner)
BCL 338i
Installation and mounting
or
63