● Position the device so that it is not exposed to direct sunlight.
● Position the device so that it is easily accessible for the operator.
● Choose a suitable installation height.
● Ensure that the air vents of the device are not covered as a result of installation. Note the
permitted mounting positions.
3.2.2
Mounting clips or mounting brackets, position for IP65
Types of mounting clips and mounting brackets
You can mount the device as follows:
● Device with 15", 19" or 22" display:
with 12 steel mounting clips (included in the product package and available as
accessories)
● Device with 15", 19" or 22" display:
With 6 mounting brackets (available as accessories)
See also section "Accessories (Page 27)".
Positions of the mounting clips or mounting brackets for IP65
To achieve the IP65 degree of protection for the device, the mounting clips or brackets must
be affixed at the positions shown below.
Device
Touch screen device
with:
•
•
IFP, IFP PRO, IFP ETH
Operating Instructions, 09/2019, A5E31298376-AJ
15" display
19" display
Installing and connecting the device
3.2 Installing the built-in unit
Position
45