Siemens SINUMERIK 840Di sl Programming Manual page 513

ISAXIS BOOL
TRUE:
Axis exists:
Otherwise:
FALSE
AXSTRING STRING
4. Tool management
Result
NEWT # INT:
T number
GETT # INT:
T number
GETACTT # INT:
Status
TOOLENV INT:
Status
DELTOOLENV INT:
Status
GETTENV INT:
Status
#) The keyword is not valid for SINUMERIK FM-NC.
Result
GETTCOR INT:
Status
Result
SETTCOR INT:
Status
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
INT:
Number of the
geometry axis
(1 to 3)
AXIS
1st parameter
STRING [32]:
Tool name
STRING [32]:
Tool name
INT:
T number
STRING:
Name
STRING:
Name
STRING:
Name
1st par. 2nd par. 3rd par.
REAL: STRING: STRING:
Length Compon Tool
[11] ents: environm
Coordi- ent/
nate " "
system
1st par. 2nd par. 3rd par.
REAL: STRING: INT:
Offset Compo- Compon
vector nent(s) ent(s) to
[0-3] be offset
Check whether the geometry axis 1 to 3 specified
as parameter exists in accordance with
$MC_AXCONF_GEOAX_ASSIGN_TAB.
Convert axis identifier into string.
2nd parameter Explanation
INT: Duplo Create new tool (prepare tool data). The duplo
number number can be omitted.
INT: Duplo Get T number for tool identifier
number
STRING[32]: Get active tool from a group of tools with the same
Tool name name
Save a tool environment in SRAM with the
specified name
Delete a tool environment in SRAM with the
specified name. All tool environments if no name
specified.
INT: Reading:
Number = [0] T number,
Number = [1] D number,
Number = [2] DL number
from a tool environment with the specified name
4th par. 5th par.
INT: INT:
Int. T D
number number
4th par. 5th par.
INT: INT:
Type of Index of
write geo. axis
operation
12.4 List of predefined subprograms
6th par. Explanation
INT: Read tool lengths and tool
length components from tool
DL
environment or current
number
environment
Details: See /FB1/ Function
Manual Basic Functions; (W1)
6th par. 7th par. 8th par.
STRING: INT: INT:
Name of Int. T D
tool number number
environm
ent
Tables
9th par.
INT:
DL
number
513