The temperature inside
The command zone switches off due to
Wait for the hob to cool
the electronic parts is too
an excessively high temperature
before reusing it
Continuous (permanent) key activation
Water, pots or kitchen
Clean the surface,
is detected. The interface switches off
tools are on top of the
remove any objects from
after 10 seconds.
For all other error
Call customer service and report the error code
( E ... U ... )
5.3 Customer service
Before contacting Customer Service
1. Check that you cannot solve the problem yourself based on the points described in "Troubleshooting".
2. Switch the device off and on again to see if the problem resolves itself.
If the fault persists after the above checks, contact the nearest Customer Service.