How To Remove The System Control Switch/Power Button Cable - Sun Microsystems Sun Fire V480 Parts Installation And Removal Manual

How to Remove the System Control
Switch/Power Button Cable
Before You Begin
Complete these tasks:
"How to Power Off the System" on page 22
"How to Slide the System Out of the Cabinet" on page 25
"How to Avoid Electrostatic Discharge" on page 39
"How to Remove the Power Supply Access Panel" on page 44
"How to Remove the PCI Access Panel" on page 90
"How to Remove Fan Tray 1" on page 93
"How to Remove the Removable Media Assembly" on page 125
"How to Remove the Media Door Assembly" on page 143
What to Do
1. Disconnect the P3 cable end from the back panel flex-circuit cable.
Press the tab to unlock the cable end. Unhook the cable from its clips on the chassis.
2. Remove the cable assembly from the cable tie on the side of the drive bay.
3. Pull the cable assembly up and out of the chassis.
Chapter 7 Servicing Cables 161