How To Remove The Fc-Al Backplane - Sun Microsystems Sun Fire V480 Parts Installation And Removal Manual

How to Remove the FC-AL Backplane

Before You Begin
Complete these tasks:
"How to Power Off the System" on page 22
"How to Remove a Disk Drive" on page 53
"How to Slide the System Out of the Cabinet" on page 25
"How to Remove the PCI Access Panel" on page 90
"How to Avoid Electrostatic Discharge" on page 39
"How to Remove Fan Tray 1" on page 93
What to Do
1. Disconnect the Fibre Channel-Arbitrated Loop (FC-AL) power cable from J0201 on
the FC-AL backplane.
Press the tab to unlock the cable and pull the cable out of the connector.
Note – For cable routing information, see "Cable Connections and Routing" on
page 152.
2. Disconnect the FC-AL data cable from J0200 on the FC-AL backplane.
Push the ejector levers apart to eject the cable from its connector.
3. Loosen the two Phillips No. 1 captive screws on the FC-AL backplane mounting
bracket.
122 Sun Fire V480 Server Parts Installation and Removal Guide • December 2002