Mounting The Operation Panel (Fr-Du07) On The Enclosure Surface - Mitsubishi F700 Series Instruction Manual

2.3.5

Mounting the operation panel (FR-DU07) on the enclosure surface

Having an operation panel on the enclosure surface is convenient. With a connection cable, you can mount the
operation panel (FR-DU07) or the parameter unit (FR-PU07) to the enclosure surface, and connect it to the inverter.
Use the option FR-CB2, or the connector and cable available on the market.
(For mounting the operation panel (FR-DU07), the optional connector (FR-ADP) is required.)
Securely insert one end of connection cable until the stoppers are fixed.
Parameter unit (FR-PU07)
(option)
REMARKS
· Refer to the following when fabricating the cable on the user side. Keep the total cable length within 20m.
Commercially available product examples (as of January 2010)
Product
SGLPEV-T (Cat5e/300m)
Communication cable
RJ-45 connector
* Do not use pins No. 2, 8 of the communication cable.
Refer to page 209 for RS-485 communication.
Parameter unit connection cable
(FR-CB2 )(option)
Operation panel(FR-DU07)
Operation panel connection connector
(FR-ADP)(option)
Type
Mitsubishi Cable Industries, Ltd.
24AWG × 4P*
5-554720-3 Tyco Electronics Corporation
Control circuit specifications
Maker
2
29