Chapter 5: Administration Site
Configuring the default user settings
To configure the default user settings:
1.
Select Administration > Users and Groups > User List to open The User
List table (see Figure 39).
2.
Click Edit User Defaults.
The User Defaults table appears as shown in the following figure.
Figure 40. Edit User Defaults table
3.
Configure the following default settings:
•
Maximum Allowed Disk Space (MB). This value is the default amount
of disk space available to a newly created user for file storage and Web
pages. The default value is 100 MB. The value entered must be a whole
number greater than zero (you cannot enter zero).
If you leave this field blank, the user has unlimited disk space.
•
User Name Generation. You can specify one of the following formats
for the Qube 3 to automatically format user names.
•
Initial of first name & last name
•
First name & initial of last name
•
Only first name
•
Only last name
4.
Click Save.
106
Cobalt Qube 3 User Manual