Using The Lcd Console To Configure The Network; Configuring The Network Settings - Cobalt Digital Inc CacheRaQ 4 User Manual

Using the LCD console to configure the network
Figure 7 shows the LCD console for the CacheRaQ 4.
The LCD screen on the front of the CacheRaQ 4 displays two lines of text. The
top line of the LCD presents instructions on data to enter; the bottom line
displays the data already entered. Use the arrow buttons to the right of the LCD
screen to enter the required network information manually.
Appendix A, "Using the LCD Console", provides more information about the
LCD console.
Figure 7. LCD console
The arrow buttons function as follows:
The Left arrow button moves the cursor to the left.
The Right arrow button moves the cursor to the right.
The Up arrow button increases the digit located at the cursor position.
The Down arrow button decreases the digit located at the cursor position.
The S button ("select") displays the next option.
S
The E button ("enter") accepts the information entered or the option
E
displayed.
Configuring the network settings
During setup, the LCD console is used to enter network configuration
information on the CacheRaQ 4.
Through the LCD console, you configure the IP addresses of the primary
network interface (Network 1), the netmask and the gateway. You configure the
other network settings through the browser-based user interface (UI).
Follow these steps to configure the network manually:
LCD screen
Cobalt CacheRaQ 4 User Manual
Phase 1: Making the connection
LCD arrow buttons
S
E
15