Telnet - Cobalt Digital Inc COBALT Qube 3 User Manual

Telnet

Caution: You can adversely affect the performance of your Qube 3
if you modify system configuration files. Check your warranty card
!
for details.
Caution: Only advanced users who need to run shell scripts or use
shell commands should access the Qube 3 through the telnet
!
function. An advanced user is someone who is proficient in using
the Unix operating system.
Direct root logins are not allowed on the Qube 3. To obtain a root
shell, telnet to the server and log in as the user admin. From the
command prompt, type "su -" and press enter. Enter the
administrator's password at the password prompt.
Only the Qube 3 Administrator can su - to root.
To specify the access settings for telnet:
1. Select Administration > Network Services > Telnet.The Telnet Settings
table appears; see Figure 79.
Figure 79. Telnet Settings table
Cobalt Qube 3 User Manual
Network Services
161