Language Selection; License Agreement - Cobalt Digital Inc COBALT Qube 3 User Manual

Language selection

On the first screen of the Setup Wizard, you can select a different language for
the Server Desktop UI. Select a language from the pull-down menu.
✍
Note: The language chosen in this step applies only to the user
admin. When a new user accesses the Qube 3, the server
synchronizes with the language preference configured in settings of
the user's Web browser and displays the Welcome screen in that
language.
If the language selected in the browser preferences is not available
on the Qube 3, the server defaults to the Administrator's choice of
language.
The selected language applies to the Server Desktop UI, the messages and
commands on the LCD screen and the alert messages that Active Monitor sends
to the Qube 3 Administrator.
Once the Qube 3 has been set up, an individual user can change the language
displayed on the Qube 3. For more information, see "Personal profile" on
page 89.

License agreement

You are presented with the Cobalt Network License Agreement screen.
By clicking on the arrow button on this screen, you acknowledge receipt of and
agreement with the terms and conditions set forth on the Warranty/Registration
Card enclosed with your Cobalt Qube 3 and with the License Agreement shown
in Figure 9.
Read through the License and click the right arrow at the bottom.
Phase 2: Setting up with the Web browser
Cobalt Qube 3 User Manual 23