Table of Contents
Advertisement
2.
In the pull-down menu, select Lightweight Directory Access Protocol
(LDAP) Import to open the following table.
Figure 50. LDAP Import table
3.
Configure the settings in the LDAP Import table.
•
Server Network Address. The IP or hostname of the server from which
you wish to import.
•
Base Distinctive Name (Dn). The base of the LDAP entries to import.
•
Binding Distinctive Name (Dn). This is the binding distinctive name
(Dn) of the admin user on the LDAP server. This value along with its
respective password are needed to authenticate and acquire the
appropriate information for importing users.
•
Password. This is the password for the binding distinctive name (Dn).
•
User Filter. (optional) Enter the filter used for determining which object
classes to import as users. If the field is left blank, the system uses the
value (|(objectClass=cobaltAccount)(objectClass=posixAccount)).
•
Group Filter. (optional) Enter the filter used for determining which
object classes to import as groups. If the field is left blank, the system
uses the value (|(objectClass=cobaltGroup)(objectClass=posixGroup)).
4.
Click Save.
Cobalt Qube 3 User Manual
Users and Groups
121
Advertisement
Table of Contents
