Table of Contents
Advertisement
Chapter 5: Administration Site
2.
Click Add. The Add Mailing List table appears in the Basic section; see
Figure 53.
Figure 53. Add Mailing List - Basic table
3. Enter a name for the mailing list in the List Name field.
You can only use lowercase English letters, numbers, and the hyphen (-) and
underscore (_) characters. There is no limit on the number of characters in
the name.
4. Add local subscribers to the mailing list.
To add an existing Qube 3 user, select a name in the not subscribed list and
click the left arrow to move the subscriber to the subscribed list.
5. Add remote (external) subscribers to the mailing list.
To add an external subscriber to the mailing list, enter the complete email
address in the External Subscribers field (for example, tstonis@xyz.com).
6.
You can enter additional information about the mailing list in the Remarks
field.
7.
Click Advanced in the top right corner. The Advanced section appears; see
Figure 54.
124
Cobalt Qube 3 User Manual
Advertisement
Table of Contents
