Table of Contents
Advertisement
•
Connection Period. You can select certain hours of the day during
which the modem cannot connect to the Internet. By default, the modem
is allowed to dial out at any time of the day.
In the scrolling window Connect Times, click on a particular hour or
hours, and then click the green arrow to move that time period into the
scrolling window Do Not Connect.
The hours are displayed according to a 24-hour clock. For example, the
period "00:00 - 00:59" represents 12:00 a.m. to 12:59 a.m.; the period
"16:00 - 16.59" represents 4:00 p.m. to 4:59 p.m. See Figure 85.
•
Phone Number. Enter the dial-up telephone number of your ISP.
•
Dial-Up Account User Name. Enter the user name of the dial-up
account used to log in to your ISP.
•
Dial-Up Account Password. Enter the password of the dial-up account
used to log in to your ISP.
•
Modem Initialization String. If your modem requires a specific
initialization string, enter the string. Otherwise, leave the default value of
ATZ. Refer to the user manual for your modem if you are having
difficulty establishing a connection using the default string.
•
Local IP Address. Enter the local IP address at this end of the modem
connection only if your ISP has assigned a static IP address.
•
Modem Speed (Baud). Select the speed of the serial line connection to
the modem. The default value is 115 200.
•
Enable Pulse Dialing. A telephone uses either pulse dialing or tone
dialing. If your telephone uses pulse dialing, click the check box to
enable the Pulse Dialing feature. Enabling this feature causes the system
to use pulse dialing when connecting. By default, pulse dialing is OFF.
•
IP Masquerading. IP masquerading enables network address translation
functionality that allows your organization to share Internet access by
translating all network traffic between your one publicly accessible IP
address and your many privately accessible IP addresses through this
Qube 3 server.
✍
Note: If you configured the Qube 3 manually and want to use the
Qube 3 as the Internet connection for your network, you must
configure the clients on your network with the IP address of the
Qube 3 as their default gateway.
4. Click Save.
Cobalt Qube 3 User Manual
System
171
Advertisement
Table of Contents
