Table of Contents
Advertisement
Appendix C: Upgrading the Qube 3
Closing the Qube 3
To close the Qube 3, perform the steps for opening the Qube 3 in reverse order.
1.
Carefully replace the sheet metal top cover, locating the tabs to the back of
the Qube 3. See Figure 106, #2.
2.
Carefully replace the blue plastic top cover, snapping all sides into place. See
Figure 106, #1.
3.
Re-attach the single screw which holds the blue plastic top cover to the
system chassis.
4. Insert the power cord into the power supply connector at the bottom right of
the rear panel.
5.
Plug in the Qube 3.
6.
Power up the Qube 3.
220
Cobalt Qube 3 User Manual
Advertisement
Table of Contents
