Cobalt Digital Inc COBALT Qube 3 User Manual page 40

Chapter 2: Setting up the Qube 3
An IP address consists of four numbers, ranging from 0 to 255, separated by
periods (for example, 192.168.25.77); this is often referred to as "dot-quad
notation".
To enter the IP address for the Qube 3:
1. Use the arrow buttons on the LCD console to enter the IP address assigned to
the Qube 3.
2. Press the
If the IP address is valid, the following prompt appears:
PRIMARY NETMASK:
000.000.000.000
3. Enter the netmask of your network.
4. Press the
If the netmask is valid, the following prompt appears:
ENTER GATEWAY:
000.000.000.000
5. Enter the IP address of the gateway for your network. If your network does
not have a gateway, do not enter a number. Press the
the default value of "000.000.000.000".
✍
Note: A gateway or router address is not required for a Qube 3 that
is only connected to a local area network (LAN). If you connect to
another network through the Qube 3, you may require a gateway
address. If you connect to the Internet with a modem, you do not
require a gateway.
18
button to accept the IP address.
button to accept the entry.
Cobalt Qube 3 User Manual
button to accept